bedside lamp. 2 hidden in the goods stored
| wangkiky 3041 | ||
|
diagonal cross lines, in order to prevail, will slowly move to the keel and the elevation line flush then, is fixedly connected with the hanger. The same method is used to fix the suspended ceiling keel, connecting the upper and lower two keel. The wooden keel ceiling construction process: 6, keel leveling, arching the keel, surface pull diagonal cross in the ceiling, the smoothness of the check and adjust the ceiling, a large area when the arch, the arch height is about 1/200~1/3000 room span wooden keel ceiling
construction process: 7, install the paper reinforced gypsum board with tapping screw to paper reinforcement plate Shiqing on keel nail shop, installation should pay attention to: the long side of the gypsum board must be in a vertical cross state and keel, keel fell on the edge of the central part. Gypsum board should be installed in a free state, fixed from the central to the plate of the four sides of the order of fixed, gypsum board and the surface should be set aside between the 6mm gap. The screw and the plate edge distance of 10 15mm is appropriate, self tapping screw distance not greater than 200mm (optional 150 170mm). Sheet binding is completed, using gypsum putty filled seam and nail holes, with joint tape or glass fiber mesh tape joint reinforcement material dry paste seams, the caulking shall then in front of a caulking putty after drying. The above content is to introduce you to the house small wooden keel ceiling installation construction process, I hope to help you, if you want to know more knowledge of wood keel [url=http://cheappricewpcdeck.com/wpc-fence/2330.html]composite panels of wood fiber and recycled plastic[/url] [url=http://cheappricewpcdeck.com/wpc-fence/2329.html]quick cap deck covering[/url] [url=http://cheappricewpcdeck.com/wpc-fence/2328.html]composite decks for concrete patio[/url] |
||
