serious.But in fact, black
| wangkiky 2888 | ||
|
may be a rusty spot decayed wood or metal, there are also was peeling paint quality is bad.A small area of the paint peeling, can use first fine sand paper burnish, then wipe on be bored with child, brush on priming paint, go up afresh again lacquer.A large area of spalling must away all of your paint besmear again.2 first, paint to bubble, the bubble burst, such as water, explains namely lacquer layer under or behind the moisture infiltration, classics sun is basked and evaporation into steam, water will paint jacking into a
bubble.At this point, the first to use sirocco spray * remove foam paint, wood natural drying, and then paint primer, and then paint on the entire repair surface.Unless otherwise stipulated in the bubble water, is likely to be wood craze, there is a small amount of air, classics sun is basked, air inflation, paint it up.In the face of this situation, first scraped the paint, blister packing filled with resin crack, paint again, or without packing,, after blowing to paint coated with microporous coating directly.Crack of 3, most of this kind of circumstance wants chemically to divide lacquer agent or sirocco spray * to remove paint, go up afresh again lacquer.If rupture range is not big, then can use sand milling piece or dry wet amphibious sand paper to touch water, the paint that abrasion ruptures, it is after exterior burnish is smooth, wipe on be bored with child, brush on priming paint, and painted again.4 flow, paint paint is brushed too thickly, can cause namely stream drip.Can take advantage of the paint has not dry, brush paint with a brush, if [url=http://compositefencewholesale.com/fence/811.html]wall boards panels germany[/url] [url=http://compositefencewholesale.com/deck/79.html]composite decking to cover stair treads[/url] [url=http://compositefencewholesale.com/deck/480.html]building anti insect panels wall[/url] |
||
