What kind of splicing the floor more perfect
| wangkiky 2872 | ||
|
Solid wood splicing plate is the use of different structural forms,[url=http://bestwpcforsale.com/blog/anti-slip-synthetic-teak-boat-decking.html]Anti Slip Synthetic Teak Boat Decking[/url] the required narrow width of solid wood panels into the required width of the plate, such as solid wood table, solid wood seat plate and so on. Different splicing methods bring different viewing results. Conventional thickness of solid wood puzzle: desktop, drawer panel is 16-25mm, thick desktop 30-50mm, panels 6-12mm, drawer side panels, drawer backplane 10-15mm. In order to minimize the puzzle of the contraction and warping,[url=http://bestwpcforsale.com/blog/environmentally-friendly-flooring.html]environmentally friendly flooring[/url] solid wood narrow width should be limited, in modern furniture production, the general wood narrow plate does not exceed 60mm. In addition to limiting the width of solid wood narrow board, the same plywood components in the tree species should be consistent or similar material, [url=http://bestwpcforsale.com/blog/long-life-dont-fade-wpc-fence.html]Long life, don��t fade wpc fence[/url] adjacent wood narrow board moisture content deviation should not exceed 1%. Solid wood puzzle in a variety of structural forms, the actual production should be based on different uses to choose the appropriate puzzle form. First, flat fight The Pattern of Flatness in Solid Wood. Flat hard wood joints should be flat plane, flat joints adjacent to the joints should be tightly seamless, [url=http://bestwpcforsale.com/blog/high-performance-composite-teak-boat-decking.html]High Performance Composite teak boat decking[/url] the use of glue dry rubber pressure bonding of a solid wood puzzle form. Solid wood flat structure of simple processing, high production efficiency, low loss rate of solid wood narrow plate. In the glue when the bonding surface should be aligned to avoid the phenomenon of uneven plate surface. |
||
