Second, the paver transporters and transport stage of the operating procedures
| wangkiky 2391 | ||
|
Asphalt concrete paver is a pavement machinery in the technical content of high, complex structure of the special equipment, power, high temperature, often in the field, subject to strong vibration,Resistance corrosion elastomeric concrete expansion joint producers shock load, working environment is extremely bad, but the paving out Of the pavement accuracy requirements are high, in order to ensure its accuracy, require paver often in good and reliable condition, to make a lot of careful maintenance work. Staff must be careful every day before and after work on the paver routine maintenance, the main contents include cleaning, inspection, fastening, lubrication four operations. 1. Cleaning operations Cleaning work is mainly completed after the job, that is, after work every day to take advantage of the machine in the hot state to leave the work site, raised screed, with tools to hopper, screed, scraper, spiral separator, walking System, tamping hammer and frame around where there are residual asphalt parts are cleaned him, in addition to using a special blade, the necessary first to use diesel fuel sprayer for washing. Moving parts to be injected into the provisions of the lubricating oil while running at low speed 3 to 5 minutes,Small infrastructure road maintenance machine hydraulic cylinder piston rod to be coated with thin layer of special grease. Special Note: operation to pay attention to safety and electrical protection; to prevent fire and pollution of the grassroots. 2. Check the job 1) Check the fuel, lubricating oil, hydraulic oil and engine coolant level and add as required. 2) Check the lubricating stock of the centralized lubrication butter pump and add the high temperature grease. 3) check the control parts and control the integrity of the integrity and found that the failure to remove in time. 4) Check the hydraulic system of any oil leakage phenomenon and promptly ruled out. 5) check the travel system, if the wheel is to view the tire pressure, both sides (left and right) should be equal,Road Nursing Vehicle Use Instructions if necessary, according to the provisions of filling, inflatable, if crawler is to check the track tension is appropriate and equal on both sides. 6) Check the lighting, audio signal and the various parts of the safety protection device is complete and good. 7) check the engine working status, all kinds of meters and light work; check the transmission system with or without abnormalities. Immediately remove the found fault. |
||
