What are the steps to remove a small roller component?
| wangkiky 2124 | ||
|
Keep regular cleaning and maintenance after the small rollers used. During the regular cleaning , you need to dismantle parts of the equipment, this can be cleaned more clear. How to maintenance for small roller is also a difficult task. In fact, the most important thing is clean, maintenance will be very simple after understand the cleaning. During the demolition, follow the below steps:
1. Remove the nut shells pad flat dovetail damping block , hanging under the plum pull assembly. 2.Stand the reducer, up the motor, frame mounting bolts and remove the motor adapter plate fixing bolt and spend, discharge the adapter plate between motor and frame adapter plate. 3.Flip reducer, so that the rate, tubing put up, plus remove, drain pipes fixing bolts and screws barrels of oil, plus remove, drain pipes, remove the plum pull fixing bolts, remove the plum pull. 4.Removal the construction bolt of vibration motor, remove the motor and axle sleeve. 5.Removal shock holder to strut mounting bolts with the corresponding bolt screw the hole of shock holder , push-out the shock holder. 6.Apart and discrete the condenser. Removal the construction bolts from the condenser, discharge the condenser from walking support. Apart the condenser assembly from the condenser, remove the O-ring from the condenser tank. Use a flat screwdriver to remove the pan-head screws and spring washers, remove perforated plate and distance sleeves and wool felt from the condensing cover. 7.Separate the walking support settings and left bearing cover.Follow the above steps to discharge parts of small roller,no any confusion after discharge. Keep every parts well. Development of vibratory compaction technology for road rollers Economic and environmental benefits is getting more and more attention and recognition.Practice shows this technology has good effects on compacting soil and asphalt pavement.From the 1950s,vibration compaction technology has made great development, occupied absolutely advantage in the roller market.But the vibration compaction still can not solve the all problems,for example, the refine compaction to the bridge surface, pack and residential area. The vertical acting is not good. And, strong vibration only can make the material dispersed or broken on the unstable soil,which can not achieve the density. During the rolling process, vibratory roller rely on a strong exciting force to be transit vibration energy to material, it exits by the roller wheel shock the pavement to achieve the kneading action on the material and rapid compaction. Vibration roller make vibration sports by the changing the direction of two eccentric block which changes one direction by turn one circle. Related Sites: [url=http://roadroutercrack.com/blog-new/1332.html]Environmentally friendly asphalt crack sealing material market[/url] |
||
