The characteristics of plastic wood flooring and maintenance methods
| wangkiky 2014 | ||
|
Construction Technology of Plastic - wood Flooring
1, plastic wood can use ordinary woodworking machinery cutting, sawing, drilling, open tenon. 2, between the plastic and wood can be used to fasten the self-tapping screws (recommended outdoor use of stainless steel tapping screws); wood and steel to use self-drilling tapping screws. 3, wood and plastic wood between the use of self-tapping screws when the first hole should be fastened, that is, pre-drilling. The pre-drilled hole diameter should be less than 3/4 of the screw diameter. 4, the installation of outdoor flooring time, plastic wood profiles and between each keel need to use about a screw. The characteristics of plastic wood flooring 1, waterproof, moisture. The fundamental solution to the wet wood products and more water environment after absorbing moisture damp, swelling deformation problems, can be used to the traditional wood products can not be used in the environment. 2, pest control, anti-termite, effectively eliminate insect harassment, to extend the service life. 3, colorful, many colors to choose from. Not only has a natural wood texture and wood texture, but also according to their own personality to customize the required color. 4, strong plasticity, can be very simple to achieve personalized style, fully embodies the personality style. 5, high environmental protection, pollution-free, pollution-free, can be recycled. The product does not contain benzene, formaldehyde content of 0.2, lower than the EO-class standards for the European classification of environmental standards can be recycled greatly saves the use of wood for sustainable national policy for the benefit of the community. 6, high fire resistance. Can be effective flame retardant, fire rating to B1 level, in case of fire self-extinguishing, do not produce any toxic gases. 7, the processability is good, can be set, planing, sawing, drilling, the surface can be painted. 8, the installation is simple, the construction is convenient, does not need the complicated construction craft, saves the installment time and the expense. 9, no cracking, no expansion, no deformation, no maintenance and maintenance, easy to clean, save later maintenance and repair costs. 10, sound-absorbing effect is good, energy-efficient, so that indoor energy saving up to 30%. Plastic floor maintenance 1, with soap, hot water and hard brush to remove dirt and residue. After the plastic-wood flooring is installed, in this way clean up dirt and debris. 2, with alcohol or acetone gently wipe printed on the side of the mark on the plastic floor. 3, Use conventional floor cleaners or detergents containing bleach (sodium hypochlorite) and detergents. 4, the floor has grease stains, immediately use the home in addition to oil removal agent, and then rinse with hot water. 5, Use hot soapy water and bleach to clean areas marked with chalk. Colored chalk marks are stubborn and can not be removed, so consider using white chalk or talc on the floor. 6, on the floor to melt ice and calcium chloride or stone salt, most of the maintenance of home products stores have. When the ice begins to melt, it is rinsed off. 7, with hot soapy water to remove ink stains, and then thoroughly cleaned. 8, with the use of oxalic acid or phosphate-based cleaning products to remove dirt on the floor, rust stains. This will reduce smudges and may also clear them. 9, the use of common rust cleaning agent to remove the pollution caused by pigmentation of the floor weathering. 10, according to the instructions on the packaging of bleach, bleach mixed with hot water cleaning wine stains and fruit stains. Gently wipe stains and rinse with hot water. Related Sites: [url=http://environmentallyfriendlyfloor.com//solution/1167.html]wharf fence wood plastic composites[/url] |
||
