flooring is a metal oxide layer
| wangkiky 1944 | ||
|
If you choose laminate flooring can choose Dekor, Courtyard, regal, macro-resistant, the EU Code, Park Lane, and other famous brands dedicated to heat the floor. These manufacturers strict requirements on the density of the substrate, the strength of the same thickness, permeability, good heat dissipation, heat resistance after special treatment. If you choose parquet can choose to Hofman, LG,[url=http://pvcboardprice.com/pvc-board/5007.html]pvc adhesive vinyl sheet[/url]
silver balls, time, and other famous brands dedicated to heat the floor. Selectively heat the floor is recommended to choose laminate flooring. Because the thickness of the composite floor mostly in the 7 ~ 8mm, it is easy to heat geothermal system is conducted to the surface, and the surface of the flooring is a metal oxide layer of a wear-resistant, heat diffusion in the surface very quickly and evenly.[url=http://pvcboardprice.com/pvc-board/5020.html]plywood sheets sizes Denmark[/url] The wood floor is relatively thick, usually about 2cm in thickness, and the installation Shihai fight keel, so the heat is not easily conducted geothermal system to the surface, and thermal conductivity of wood is very low, this will result in waste heat, but also make the surface temperature uneven, feel the temperature difference is very obvious. Import quality of the floor to the European Enpr13329 standards,[url=http://pvcboardprice.com/pvc-board/4972.html]white shaker cabinets[/url] |
||
