Safety operation rules for road milling machines
| wangkiky 1825 | ||
|
Maintenance of milling machine
1、Road milling machine maintenance procedures, safety should take attention ,also work, and arson, etc., and protective equipment is necessary to wear during the maintenance process. 2、Without making special note, maintenance work should be done under the condition of the engine stopped running. 3、Before starting maintenance, make sure the road milling machine will not be inadvertently activated, rotate or fall. 4、When cleaning the road milling body, not using flammable materials. 5、When using high-pressure cleaners or steam spray device, it should be covered when water jet power components, insulation, ventilation equipment if necessary. 6、Several welding work must be note the following （1）Turn off the power. （2）Interrupts the power supply line （3） Find adjustment of the measuring device (plug 2 × 2), the central control computer and the drive control using the power switch (2 × 1 plug) on your computer. And a switch (1 Double plug) 6 slave and engine control device with electrical power on the power supply should be disconnected. 4）Welder ground should be as far away from the solder joint. 7、 Change running diesel engine oil after 250 hours after the first time trial operation, replace after every 500 hours . 8, during the first oil filter 250 hours during a test run after the replacement, after no interval 500 hours to replace. 8、Change the oil filter after250 hours,replace every 500 hours. 9、Add a little lubrication for new fuel filter seal,full fill the fuel oil to filter before installing, for tightening. 10、Air filter every 50 hours to empty the dust collector, then the team with compressed air filter clean sweep. 11、Coolant filter need to be changed replaced every 1000 hours or one time every year. Related Sites: [url=http://roadcuttingmachine.com/blog/1875.html]ultra low table processing material is disposed road[/url] [url=http://roadcuttingmachine.com/blog/5717.html]How To Install Pavers[/url] [url=http://roadcuttingmachine.com/blog/1110.html]powerful construction machinery and equipment[/url] [url=http://roadcuttingmachine.com/blog/694.html]import asphalt cutter method[/url] |
||
