Note the small roller vibration when walking
| wangkiky 1568 | ||
|
For security reasons, the machine is no vibration function when it is "precision walking" mode. When the small roller start to vibration, along with the pulley vibration vibrator. This vibration increases compaction force from the vibration machine to pavement material . The vibration amplitude can have two options and the choice of different amplitudes corresponding to different vibration frequencies.
Vibration system is controlled by the SAAO system to obtain stable vibration frequency. Vibration frequency is controlled by the trimming switch setting. If the external causes change in the engine speed, control system will be calculated and compensated to obtain stable vibration frequency. Walking with a vibration process should note the following. 1、Not open the vibration nearby buildings and bridges, which might cause damage to these facilities. 2、Before opening vibration, make sure there is no underground pipelines, such as water, gas, cable and sewage pipes, etc. These facilities can also be easily damaged or cause an explosion by vibrations. 3、Since drum of steel wheel will reduce adhesion to the ground, mechanical slip may occur even tipping during the process through the hard ground or ramps. 4、When you need a large amount of compaction in earthworks, the machine should be at a slower pace and an appropriate frequency to compact material. Related Sites: [url=http://roadcuttingmachine.com/blog/1834.html]bitumen pressure distributor factory direct[/url] [url=http://roadcuttingmachine.com/blog/26.html]compaction machine electric plate compactor[/url] [url=http://roadcuttingmachine.com/blog/4485.html]Trowel Equipment Prices[/url] [url=http://roadcuttingmachine.com/blog/997.html]trustworthy road paver[/url] |
||
